| Quantity: | |
|---|---|
Rated at 3.7V nominal voltage and 12000mAh (0.2C discharge) capacity, this APTPES lithium battery pack targets industrial equipment where space and weight constraints are critical. The lithium polymer cell architecture configured as 2 in parallel (2P) provides balanced energy density. A built-in protection IC safeguards against overcharge, over-discharge, and short circuits. Factory-assembled with terminal wires for plug-and-play integration. Contact our engineering team for customization inquiries.
Integrated Multi-Protection Circuit: The built-in protection IC monitors 3.7V cell voltage in real time, guarding against overcharge, over-discharge, overcurrent, and short circuits. This prevents catastrophic cell failure during abnormal operating conditions.
Precision Cell Matching: Each lithium polymer cell undergoes capacity grading and internal resistance sorting before assembly into the 2 in parallel (2P) configuration. This matching process ensures uniform charge and discharge across all cells, extending pack lifespan and maintaining voltage stability.
Factory-Tested Quality Assurance: Every battery pack completes a full electrical testing cycle at our Dongguan facility, including charge retention verification, protection board trigger validation, and dimensional inspection. Test reports accompany each batch shipment for OEM traceability.
Global Certification Compliance: Manufactured to meet CE, RoHS, UN38.3, and MSDS documentation requirements. These certifications enable duty-free import into EU markets and compliant air freight for international distribution channels.
Low Self-Discharge Design: Advanced lithium polymer chemistry limits self-discharge to under 3% per month at room temperature. This characteristic supports inventory rotation and device storage without frequent recharge maintenance.
Balanced Thermal Management: Cell spacing and wrapping materials facilitate passive heat dissipation during charge and discharge cycles. The pack design prevents thermal hotspots that accelerate cell degradation, contributing to consistent long-term performance.
Compact Energy Density: The lithium polymer cell platform delivers high energy density relative to pack volume, making it suitable for portable and embedded applications.
| Parameter | Details |
| Model | 925084-2P |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 12000mAh (0.2C discharge) |
| Battery Type | Lithium Polymer Battery (Li-Po) |
| Cell Configuration | 2 in parallel (2P) |
| Charging Voltage | 4.2V (±0.05V) |
| Discharge Cut-off Voltage | 3.0V (protection board controlled) |
| Standard Charging Current | Recommended 2.4A (0.2C) |
| Maximum Continuous Discharge Current | 5A-10A (varies by protection board specs) |
| Built-in Protection | Overcharge, over-discharge, overcurrent, short circuit protection |
| Output Interface | Standard wires & terminals (JST/XT60, confirm specific model) |
| Product Dimensions | Approx. 84mm × 50mm × 20mm (subject to factory specs) |
| Product Weight | 200g-250g (reference only) |
| Operating Temperature | Charging: 0℃ ~ +45℃; Discharging: -20℃ ~ +60℃ |
| Cycle Life | ≥500 cycles (≥80% nominal capacity) |
This 3.7V 12000mAh (0.2C discharge) battery pack is engineered for undefined and related applications. Equipment manufacturers in the undefined sector integrate this pack as a primary power source for portable and stationary devices. The stable voltage platform and protection circuitry make it suitable for undefined where reliability is non-negotiable. OEM customers in consumer electronics, medical devices, and industrial instrumentation have validated this pack for volume production.
A: The stated dimensions refer to the battery cell body. Wire terminals extend an additional 20-80mm beyond the cell dimensions. Reserve space for wire routing in your device housing design.
A: The maximum continuous discharge current is 5A-10A (varies by protection board specs). Verify your device's steady-state current draw and startup surge requirements against these ratings. If your application needs higher current, we can customize the cell selection and protection board parameters.
A: Each battery pack ships with CE, RoHS, UN38.3, and MSDS documentation. UN38.3 test summaries cover altitude, thermal, vibration, and impact testing required for air freight compliance. Material safety data sheets are available in English for customs and regulatory submission.
A: Store at room temperature (20-25°C) with charge level between 30-50%. Perform maintenance charging every 6 months. Keep in dry, ventilated storage away from direct sunlight.
A: MOQ is flexible based on cell availability and customization requirements. Standard configurations ship within 7-15 business days. Custom OEM orders with modified wire lengths, connectors, or protection parameters require 15-25 business days including prototype sampling. Contact our sales team for a detailed quotation.
This 3.7V 12000mAh (0.2C discharge) battery pack is a standardized industrial component sourced directly from APTPES manufacturing facilities in Dongguan, China. By eliminating intermediaries, we offer competitive tiered pricing for volume procurement alongside flexible MOQ arrangements. Our engineering team provides comprehensive OEM/ODM customization including wire length modification, connector selection, cell capacity adjustment, and protection board recalibration. From initial specification review to production sampling and quality validation, we support your project through the complete product lifecycle. Contact us to discuss your requirements.
Share the voltage, capacity, dimensions and quantity you need. Our engineers reply with a tailored OEM/ODM quotation within 24 hours.