Rechargeable 11.1V 3200mAh Robotic Vacuum Cleaner Lithium-ion Battery Pack

Rated at 11.1V nominal voltage and 3200mAh (Measured at 0.2C discharge) capacity, this APTPES lithium battery pack targets robotic vacuum cleaners where space and weight constraints are critical. The lithium-ion cell architecture configured as 3 Series 1 Parallel (3S1P) provides balanced energy density at approximately Approximately 180g-220g (varies depending on casing and wiring). A built-in protection IC safeguards against overcharge, over-discharge, and short circuits. Factory-assembled with terminal wires for plug-and-play integration. Contact our engineering team for customization inquiries.

Features & Benefits

• Integrated Multi-Protection Circuit: The built-in protection IC monitors 11.1V cell voltage in real time, guarding against overcharge, over-discharge, overcurrent, and short circuits. This prevents catastrophic cell failure during abnormal operating conditions.

• Precision Cell Matching: Each lithium-ion cell undergoes capacity grading and internal resistance sorting before assembly into the 3 Series 1 Parallel (3S1P) configuration. This matching process ensures uniform charge and discharge across all cells, extending pack lifespan and maintaining voltage stability.

• Factory-Tested Quality Assurance: Every battery pack completes a full electrical testing cycle at our Dongguan facility, including charge retention verification, protection board trigger validation, and dimensional inspection. Test reports accompany each batch shipment for OEM traceability.

• Global Certification Compliance: Manufactured to meet CE, RoHS, UN38.3, and MSDS documentation requirements. These certifications enable duty-free import into EU markets and compliant air freight for international distribution channels.

• Low Self-Discharge Design: Advanced lithium-ion chemistry limits self-discharge to under 3% per month at room temperature. -20°C ~ +25°C (Half-charge state recommended for l. This characteristic supports inventory rotation and device storage without frequent recharge maintenance.

• Balanced Thermal Management: Cell spacing and wrapping materials facilitate passive heat dissipation during charge and discharge cycles. The pack design prevents thermal hotspots that accelerate cell degradation, contributing to consistent long-term performance.

• Compact Energy Density: The lithium-ion cell platform delivers high energy density relative to pack volume at Approximately 180g-220g (varies depending on casing and wiring), making it suitable for portable and embedded applications.

Technical Specifications

Applications

This 11.1V 3200mAh (Measured at 0.2C discharge) battery pack is engineered for robotic vacuum cleaners and related applications. Equipment manufacturers in the automated floor care sector integrate this pack as a primary power source for portable and stationary devices. The stable voltage platform and protection circuitry make it suitable for smart home robots where reliability is non-negotiable. OEM customers in consumer electronics, medical devices, and industrial instrumentation have validated this pack for volume production.

Frequently Asked Questions

Q1: Do the listed dimensions include the wire terminals?

A: The stated dimensions refer to the battery cell body. Wire terminals extend an additional 20-80mm beyond the cell dimensions. Reserve space for wire routing in your device housing design.

Q2: Is the discharge current sufficient for my device?

A: The maximum continuous discharge current is Limited by the protection board (usually 5-10A, sp. Verify your device's steady-state current draw and startup surge requirements against these ratings. If your application needs higher current, we can customize the cell selection and protection board parameters.

Q3: What certifications accompany this product?

A: Each battery pack ships with CE, RoHS, UN38.3, and MSDS documentation. UN38.3 test summaries cover altitude, thermal, vibration, and impact testing required for air freight compliance. Material safety data sheets are available in English for customs and regulatory submission.

Q4: What are the storage recommendations for unused inventory?

A: Store packs at -20°C ~ +25°C (Half-charge state recommended for long-term s. Maintain charge level between 30-50% for long-term storage. Perform a maintenance charge every 6 months to prevent deep discharge degradation. Avoid storing in direct sunlight or high-humidity environments.

Q5: What is the minimum order quantity and lead time?

A: MOQ is flexible based on cell availability and customization requirements. Standard configurations ship within 7-15 business days. Custom OEM orders with modified wire lengths, connectors, or protection parameters require 15-25 business days including prototype sampling. Contact our sales team for a detailed quotation.

OEM Customization & Supply

This 11.1V 3200mAh (Measured at 0.2C discharge) battery pack is a standardized industrial component sourced directly from APTPES manufacturing facilities in Dongguan, China. By eliminating intermediaries, we offer competitive tiered pricing for volume procurement alongside flexible MOQ arrangements. Our engineering team provides comprehensive OEM/ODM customization including wire length modification, connector selection, cell capacity adjustment, and protection board recalibration. From initial specification review to production sampling and quality validation, we support your project through the complete product lifecycle. Contact us to discuss your requirements.